Category: Decorate

Yarn Bouquet aka Pom Pom Flowers

5/17/2021

Are you looking for something cute and fun for these summer days ahead? Really this craft can be done for any season or holiday, let's be honest, but I think they are particularly cute for summer! It is a very simple and relatively quick craft that just about anyone can do. If you have littles wanting to help, just make sure you supervise cutting and that you handle the hot glue of course!

Supplies for flowers:

Yarn of various colors
Wooden sticks
Scissors
Hot glue

Supplies for upcycled vase:

Tin can
Patterned Paper
Embellishments
Floral Foam
Scissors
Hot Glue

1. To start, take your yarn and start with wrapping an end around something. Some people use a fork, cardboard, etc. But I think it’s easiest using your 4 fingers. Keep wrapping until you have the amount you want. The more you have = the bigger the flower!

2. Using a smaller piece of the yarn, string it through perpendicular around the whole wrapped chunk and tie it tightly.

3. Pull your tied chunk off whatever surface you are using and begin cutting the looped pieces all the way around the shape.

It should look something like this…

4. Next, trim around the yarn to make it more even all the way across, we’ll be trimming more as we go.

5. Now, you can choose if you want to “fluff out” your pom pom. You can do this by using a small comb, pet comb, fork, (something with teeth). And begin “combing” into the strands so they get fluffy. This will get messy…

This image below shows you the difference between "fluffing" and not fluffing...

6. It will look pretty uneven, so just trim around the yarn all over again 😊 Do this step with each of your pom pom flowers.

7. Next, using hot glue, glue each of your “flowers” on top of the wooden sticks. I had 6 sticks but cut 3 of them down to smaller sizes so that they would be at different heights! You're all done with your pom pom flowers at this point!

8. I decided I wanted to do a little something extra with this craft and wanted something to put the "flowers" in. I'm all about "upcycling" stuff and I had tin cans lying around that I thought would make the perfect recycled and rustic vase for these! So, take a tin can and cover it with a complimentary scrapbook paper.

9. Then, add some embellishments of your preference such as lace, ribbon, buttons, etc. to jazz up the "vase".

10. Lastly, plop a piece of floral foam into the bottom of your tin can and stick your flowers into it and you're done!

Halloween Raven Painting

10/18/2019

This painting is what I chose to mimic for my October Painted Canvas program at work. I run a "Painted Canvas" program once every quarter along with other monthly craft programs, but the Painted Canvas is, by far, people's favorite. With my other craft programs I usually always have empty seats even if the class had a full registration list but that is definitely not the case with Painted Canvas! The seats are always full!

I wanted to do something "spooky" for this quarter's painting program especially since it's October. I had something else in mind originally but ended up picking this one! I followed the tutorial from "Painting with Jane" on Youtube, she's amazing! I didn't go about it exactly as she did. She used a gold metallic canvas (have never seen those before!!) and a paint/gel medium mixture to create translucent paint. I changed mine to just using a sponge on top of gold metallic paint. It's an "ok" effect, and one I think is easier for people in my class but maybe sometime I'll give the gel medium technique a shot!

Supplies:

Acrylic Paint: Gold, Silver, Brown, Orange, White, Black
Paintbrushes - I used 3 different types
Sponge
Canvas/Canvas Board
Large circular object for tracing
Bird cutout for tracing if preferred
Pencil

1. The first step is to trace your large circular object for your blood moon (I used a large plastic bowl). You want it to be nice and big to fill up your background. Paint this circle with your gold metallic paint (you should do 2 coats).

2. "Painting with Jane" recommended using translucent paint so that the colors do not get "muddy". I understood what she meant when I started sponge painting the colors. It did seem to get muddy but I was ok with it overall once it was done. Like I said earlier, I would like to try the original artist's technique in the future. I used a dry sponge and dipped it slightly in the paint, do not saturated your sponge! I started with brown for the dark shadows on the moon, then went into orange, blending slightly, I went back through with more gold to still have the gold represented, it's too pretty not to!

Note: When you paint your moon, it is best that you go outside of the original circle. This is so you don't have an unnatural, harsh line showing through later. I did go over my line but I should have done even more because I feel I noticed where I didn't cover the areas well enough once it was finished.

3. Before we are done with the moon, add some silver highlights with your sponge, you can add a dab of white too if you're feeling daring!

4. Retrace the same object you used to reemphasize your circle. With a flat or angled brush, trace the outline of your moon with black paint. Take your time and be patient on this step. Paint the remaining white space black. I used two coats of black paint. As I put the second coat on, I also mixed in a bit of silver to make the background seem "shimmery". You don't have to do this part, it is a personal preference. You will notice this effect more in later photos.

5. Trace your bird/branch template or free draw a bird if you feel comfortable. Paint this entire space black for a good base coat. I left a spot open for the raven's eye so that some of the gold shows through later.

6. Now it's time for highlighting the raven's feathers. I mixed black with a little bit of white to get a charcoal grey. I used this color to lightly brush strokes of "feathers" throughout the bird, specifically accentuating the tail and wing. I did the same with the raven's face.

7. In between painting feathers, I went in for the beak and tried to mimic the shape done in the video.

8. I highlighted everything with white. I used my smallest/pointiest brush for this and went over the previous grey with light, quick strokes.

9. The last step is to highlight the gnarly tree branch! To do this, I lightly added some silver in various spots then, again, lightly added some white to those same highlights in smaller strokes.

That's really it! Sign your painting with your initials and you are good to go! Talk about an awesome addition to some holiday decor! (And let's all be honest here, this would look pretty good with some glitter too)

Altered Book Journal Page

9/5/2019

Let me start by saying anything... and I mean anything can be used for an altered book journal! This is what makes this project so much fun and so versatile. Every book is different, every page is different, and every material is different. The purpose of an "altered book" is making an old book into a new piece of art. There are many types of altered books, but for this project, we are beginning an altered book "journal". A journal can be used as a "smash book" for travel or random memories or can be used for a literal journal to write in. There are many possibilities.

I did this journal page spread for one of my classes. This was a little tricky as I had to come up with something that we could all do together in our own books but something that could get everyone started and get those creative gears moving! The page above is what I came up with. It is something very simple and uses minimal supplies. We could've gone crazy and used paints, textures, inks, stamps, stickers, etc. but I kept it simple for an easy clean up and to also show that you don't need anything fancy for this type of project!

Supplies:

Paper (scrapbook and scrap)
Printed Clip Art image
Printed text in a fun font
Ribbon
Elmer's Glue
Scrapbooking flowers
Hot Glue Gun
Xacto Knife

1. First off, let's talk about picking our book. If you can find something with "sewn" pages, that's the way to go! The modern glued pages are terrible for an altered book project! They are too flimsy and as you cut away more pages it loses its stability and could fall apart! These photos show what a sewn spine looks like verses a glued spine.

2. To start with, we need to "prep" our book. Everybody goes about this in different ways, but, for me, I go through and remove pages throughout the book. The more "stuff" you want to add to your book = the more pages you want to cut out. I use an Xacto knife to cut out a page. Then flip a couple of pages and cut another out. Keep going until you feel happy, at least for the time being. Make sure there are pages to the right and left of the cut section to glue together and cover up the cut page. You'll end up with quite a few lose pages (you could save these for future projects!).

3. Once you are done cutting out pages throughout the book, you are ready to start gluing. As mentioned above, glue the pages to the left and right of the cut together, hiding that cut line. I use Mod Podge for this, putting it on in an even, thin layer. You can always come back and add more if the corners aren't glued down after it dries.

4. The next step is where things start becoming "optional". What I like to do to "prep" a page, is to paint a layer of white gesso on the spread. Gesso gives a nice foundation for the rest of the items you will add. It also slightly covers the words or "greys" them out so you can still see them but you can also see your work! The page we are doing is pretty bare, you can still see the Gesso effect in the very first image on this post.

5. For this step, gather the supplies/items you want to use for your page.

I want to go over what I used for mine. The "Let your soul grow" quote was printed on a regular printer on antiqued paper. The bike was also printed on the same printer on regular copy paper. I tore some scrapbook paper to fit into the corners of the page (if you tear away/toward you = different results!). I had some spare scrapbooking flowers to use up and I also used some pieces of ribbon. Remember, I tried to keep this page spread very easy and user friendly!

6. All I did to finish this page spread up was glue! First, I arranged everything on the pages to figure out where I wanted it all to go. Once I was good with it all I glued everything down with a thin layer of Elmer's Glue, you could use Mod Podge instead. I also used the hot glue gun to glue the ribbon and the flowers down. But that was it!

This was a pretty simple page. But you could really get crazy and do pages like the examples below! Happy Journaling!

Acorn Specimen Frame

8/26/2019

This is a pretty quick fall craft to spruce up your shelf space for the autumn weather or maybe a gift idea! The one I originally saw on Pinterest was very cute with bright fall colors. There are so many options with this type of craft, it's almost overwhelming. I thought about going with a subtle brown, tan, and white color combination at first. I thought it would be very elegant for Thanksgiving but somehow I ended up switching to more of a Halloween based theme with a distressed frame and distressed pages. The possibilities are endless but I hope you find one that you love!

Supplies:

Frame without glass
Acorns (real or fake)
Embellishments
Hot Glue Gun
Elmer's Glue or Mod Podge
Glitter, optional
Paintbrushes
Cardboard or back of picture frame
Decorative paper for background
Paint

1. Gather up all of your supplies so that you have them near and dear to your project space.

2. If you're like me, I had a few frames to choose from and was very stressed with all the options! Finally, I decided on something medium-sized and relatively simple in structure. I forgot to take a picture ahead of time, but I "distressed" my frame a bit by very lightly adding black in light strokes to make it seem old/give it some more depth to the frame.

3. The original post I saw for this project involved using cute polka dot scrapbook paper as a background. I was going to do this as well, but saw I had some old book pages lying around and thought that would be a much cooler effect! If you're using a piece of scrapbook paper make sure you glue/tape it on carefully, making sure there are no air bubbles forming on your background! For me, I added torn strips of book pages by gluing each piece one by one to the background. Keep adding and adding until your background is full.

4. While your background is setting/drying, this is a good time to decide what you're going to do with your acorns. I decided to paint mine a metallic gold. I used 3 "craft" acorns and 3 real acorns that I found in the woods just to try out the different types to see if there were any differences... there aren't (but if you use real ones make sure you "bake" them to get rid of all the little buggies in there!) You'll want to do a couple of coats.

There are many ways to do this. You could leave the acorns in their natural state, paint them, decorate them, wrap them with thread/yarn/twine, oooo!

5. Of course, I couldn't help myself... I had to add at least some glitter to this project! I chose half, and decorated 3 of the acorns with a gold glitter that went well with the gold paint. I did this by "painting" on Mod Podge and dipping it into the glitter jar. They were awfully hard to get back out of there but they looked real cute when they were done.

6. While my acorns were drying I also made the glued book pages look more distressed/eerie for a more Halloween look. I lightly brushed very little black and brown paint over the pages giving them that look which you can see in the following photo.

7. Lay out your acorns and see how you like them before you glue them. I used hot glue. Make sure you put enough on there and hold the acorn while it sets.

8. Lastly, I decided to add a little extra somethin' somethin' to the frame and hot glued a flower to the upper corner.

That's it, we're all done!

Wildflower Painting

7/5/2019

Who doesn't love wildflowers?! This is a fun, whimsical painting to do with friends during the spring or summer months, they'll love it!

Supplies:

Canvas/canvas board
Easel if desired
Acrylic paints (yellow, gold, green, black, white, blue, brown, fuchsia.. all the colors, just get all the colors!)
Sponges
Q-tips
Water cup
Paper towels
Paint brushes of various shapes (at least one pointy and one tiny one!)

1. Using a sponge, dab yellow and gold onto the canvas forming a marbled background. If preferred, let some of the white show. Accentuate gold at the edges for an authentic look.

3. Using a pointed brush, add grass stems randomly throughout the sponged background using various shades of green.

5. If desired, add tiny/light dabs of green into the white so that it looks more realistic as if some of the stems/grass were showing through.

7. Add some highlights to the blue by going over the petals and center lightly with white.

9. Next, create a variety of white daisy shapes throughout the foreground. Remember not all daisies are made the same! This may take a couple of coats to get a solid white layer.

11. For the last set of wildflowers, create “Red Clover” with fuchsia. Dab the paint into a rounded cluster with Q-tips. This may take a second coat to make it a nice solid layer.

13. Make the grass more realistic by using a pointy brush and sporadically adding “wisps” of grass over some of the flowers, seen below.

2. Rinse out sponge or use a new one for the grass background. Use 3 colors for grass: black, green, lighter green. Start with black, dabbing at the bottom for the deepest, shadowy parts. For each color you add, very lightly dab at the top to “fade”. Add green above the black, blending into the black as well. And lastly add the lighter green, blending into the previous colors.

4. Using a clean brush, paint a handful of “Queen Anne’s Lace” by dabbing white in elongated “UFO” shapes. Make sure to add a “bud butt” of green underneath some of them as if you were seeing the stem of the flower.

6. Next, create various shapes and sizes to represent blue “Flax” flowers with a lighter blue paint. Be sure to make them different from one another. Keep in mind, ones in the foreground will usually be larger than the background.

8. If desired, go back over the white with a little bit of blue with a skinny brush so that the white isn’t so stark. This also gives the flowers some more dimension.

10. I don’t particularly like how I did my daisies so feel free to do them however you wish!I added an orange center, rounding the top to make some look more realistic. I lightly brushed brown throughout giving the petals and added a tiny dusting of black in some areas as well. Again, as with the “Queen Anne’s Lace” add a “bud butt” to some of the daisies as if you could see underneath it.

12. Next, add a bit of black and white very lightly to the flower for some dimension. You could also use the green from the grass before, anything to give it a dark depth in between the fuchsia. Can be done with the Q-tip as well.

14. After adding some more grass in, it’s time for the really messy part!

If you don’t want bits of paint on you or possibly your clothes, you should probably avoid this step or work extremely slow and careful!

Using white paint, mix in a few drops of water to make the paint more fluid. Dab your brush into this new mixture and hold it over the painting. LIGHTLY hit/flick the paintbrush with your opposite hand, moving throughout the painting until satisfied. All done!

Strawberry Rocks

6/16/2019

Supplies:

"strawberry-shaped" rocks
acrylic paint (exterior if they will be outdoors)
- red, white, various greens, black
paint brushes (one tiny/pointy one!)
basket/bowl for rocks
fabric if desired for the container

When I saw posts on Pinterest regarding these rocks I thought they were adorable and felt like I had to do them for a program at work, which here I am, prepping to do just that! My goal was to travel around to local parks and search for the perfect "strawberry-shaped" rocks to use, however, doing them for a public program meant that I needed about 110 of these rare diamonds and lets be real... that did not happen. I love using up supplies from previous projects and a coworker of mine had left over "mexican river rocks" from a rock-painting program, so, this is what I ended up using, cool.

Taking a quick look at project photos on Pinterest, I saw that some showed that the rocks were painted white first.

"Nah, I don't need to do that" I thought to myself peering at the 110 rocks waiting on my cart. So I went ahead and painted the first couple with red... "huh... this doesn't look too good" I quickly realized. "Do I seriously have to paint these white?" I begrudgingly thought to myself.

So, I took a shot at the next one with a nice single coat of white acrylic paint. After it dried, I put the first coat of red over it and WOW, what a difference! You can see in the below photo the ones I painted first laying in the background on newspaper vs. the new beautifully vibrant rock in my hand.

Thankfully, we have people who work with us who are often looking for "odd" jobs to do in down time.... well.... I think painting 110 rocks white is the perfect job to do for that! Thank you, thank you, thank you!

I thought 5 rocks would be a good amount for this project which ended up working well for dry times as you make your way through each rock and each layer of paint.

So, paint all rocks white, then paint all rocks red. I put 2 coats of red on top so it's a nice even layer.

After the red has dried, you are ready to start your leaves. I was very unsure of how to do this. Do I make them realistic? Do I make them whimsical? Do I blend? all ran through my mind. I decided to go for a more "cartoonish" look, I guess. And started with a base solid layer of dark green.

When I got done with all 5, I started laughing because they totally looked like tomatoes! I set them up on the post-it notes so they could dry without touching anything. Here is also where I found out how slippery these things became with the paint! So be careful and hold on to 'em.

After my dark green dried, I went over it in a smaller reflection with light green. Then, I added a dot of the dark green in the center to represent where the stem would technically be. I'm not gonna lie... I hated this... still hate it. I do not like the way this came out but got even more stressed out the more I tried to "fix" it. I found it best to just leave it as is and move on full steam ahead!

Next, will be your act of patience. Using a tiny pointy brush, paint "raindrop" shaped black "dots" all over your rocks to represent the strawberry seeds. And do this with every... single... rock!

Now, go over every... single... dot.... on every... single... rock... with a tiny white "raindrop"/"dot". You could also change this up and be more realistic by making the seeds a golden yellow or changing the look of some so they're not all exactly the same. But I didn't have time for that and was shooting for a simple, easy project for my participants!

Lastly, put them in a cute bowl, basket, container, whatever! I found farmer market style containers at our local craft store. They came in a pack of six so were super affordable! I also put a piece of fabric in to drape over the sides before I put the rocks in and wa-la, Adorable summer decor!

Let's Have a Party!

5/28/2019

It feels like it has been ages since I have last posted! But it has not quite been 2 months yet so I think I'm still in the clear. The reason for my absence was mostly due to the fact that I was in charge of throwing my parents a surprise 40th anniversary party! And it's no simple feat - especially when you want to do it up like me (Momma taught me best!).

Planning a party of any type has so many components! It starts with when to have it, where to have it, and rolls into the confusing guest list of who and who not to invite - hoy, so many decisions!

Luckily, a wonderful aunt offered to host the party for us, which means... no cost! (I tried to give her money guys, I swear). Once you decide on a guest list, you can make/order invites. So much fun!

We put a twist on the party since it was for my parents anniversary and made it a 1970's party to honor 1979. I love having a theme. It makes it more fun in my opinion! But, I also think just doing a general color scheme is fun too!

So, once you get those invites out you can start thinking about the details: food, decorations, etc. Luckily, my parents have amazing friends, everyone offered to bring something. My aunt and I provided the main dishes and everyone else brought sides and desserts. Someone else even offered to get the cake for us - thank you, thank you!

I was left to decorate, which I love more than anything. Since we went with the 1970s, I tried to stick with the beautiful hues of that era - yellow, olive green, peach, brown, etc. and it was beautifully vintage when it all came together.

I found an AWESOME flat sheet at the thrift store for $1.50 that for sure must have been from 1979 and cut it into wide strips to make runners for all the tables. They were definitely not all exact... but no one could tell since they weren't lined up right next to one another!

I also purchased various sheets/tablecloths in the other colors and cut them into 1.5-2" wide strips of varying lengths to make whimsical fabric garland to hang throughout the party area. These were a steal! - thrift stores and garage sales are where it's at! We also used one of these for a simple photo backdrop area.

To see how to make the fabric garland, read my post here:
https://www.the-art-escape.com/blog/scrap-fabric-garland

I put together a small photo collage (didn't want it to be too overwhelming) to show the progression of our family over the last 40 years and also put their 1970 style photos in frames to use as decorations on the tables - and conversation starters of course!

I used mason jars for center pieces, filled them with stones so they wouldn't blow over, and put a simple mixture of fake flowers with pin wheels or "40" stakes in them. I purchased the pin wheels for dirt cheep at a craft store and made the "40" stakes myself by cutting out "40" on glitter paper with the CriCut, gluing them to a white background, and taping them to the stakes. I trimmed everything down to fit into the glasses at varying heights. My aunt also had tree slices left from previous parties that we used under the mason jars! This provides some extra pazaz to the table for sure!

To be completely honest, I didn't really know how many tables we would have. I also didn't know where I would be hanging all the stuff I was making but I just kept making away! Everything was able to be used and it all came together perfectly!

I made real cute party favors for the guests as well - I used leftover fabric from the sheets and made "hobo bags". I filled them with a piece of Hubba-Bubba gum, Twix, and a Ring Pop - all of which were created in/around 1979. I made quick tags just by printing them out onto cardstock and cutting them out, then hole-punching them and tying them to the bags (with more scrap fabric)! I put them in an old suitcase which everyone thought was great!

My uncle put together a playlist of groovy 70's tunes for people to dance to. We had my parents cut the cake just like they did 40 years ago, they danced to a song my uncle chose for them, and we had them play the new-age shoe game. Dad was not happy with all this attention! But he was a trooper through it all.

Although it was supposed to be a surprise party... my parents totally knew! They said no one talked to them all week and people were being too weird - woops! That's ok - it was a perfect 70's bash none-the-less.

Now, for one thing that was not so perfect.... there always seems to be something that happens at events: strange family drama, weird occurrences, something doesn't work, something breaks, you forget the cake, etc.... this particular event resulted in my aunt (yes the same aunt who hosted) acquiring a broken leg!!!!

It was awful, there's just no other way to put it. I felt/feel absolutely terrible that it happened because, in my mind, if I wouldn't have had it there, she wouldn't have broken her leg! Now she will be laid up in a cast for weeks and weeks, right in the middle of summer (she's a camper, this is a big deal people!) and right before her grandbaby is due! Terrible, terrible, terrible!

It happened while we were setting up for the party, we tried to make her sit the rest of the day/night but the woman wants to move, move, move! Thankfully, she had a boot from when she broke her other leg another time and wore it all night... but, the next day, x-rays revealed it was most certainly broken. Picture below to prove how amazing my aunt is for sticking around the whole night!

So, in conclusion, there are so many different pieces and parts for planning a party. You can go in so many different directions and do just about anything, making it personal for whoever the guest-of-honor is!

Need ideas for planning your next party?? Just ask me, I'd love to help!

Tic-Tac-Toe

4/4/2019

It's been a whole month since I have posted a project. Time is flying by... sometimes it feels too incredibly fast! I have been doing a lot of projects for other people so I don't have much to post, but, my next up-coming project at the library is a DIY Tic-Tac-Toe board. I thought this idea would be perfect since spring is (supposedly) here. I don't have specific steps for this, as you can make it whatever you want! But here is the list of supplies I used and my end product!

Supplies:

Wood slice (can be bought at your local craft store but I had my uncle cut me some slices from his wood pile instead! - if you do this, make sure you dry them out first!)
Patio/outdoor paint (Amazon has a great set!)
Paintbrushes of various types
Playing pieces (flat rocks are great - heavy so they won't blow away and they're free!)
Glitter if glitter is preferred... which to me it always is!

I got the original idea on Pinterest on the AttaGirlSays blog! I am encouraging my class to paint whatever they would like for their tic-tac-toe board and have a collage of photos to provide them some ideas.

I went with a galaxy/space theme for mine, but, I would love to do like a big daisy for the base/board and then lady bugs and bumblebees for the pieces! Maybe next time!

Have fun and happy spring!

American Flag Tapestry

3/4/2019

I created this quick craft project to tie into a book discussion at work. But this so easy, anyone can do it and it's very quick as long as you are making a smaller size. I also think this would be awesome in an extra large size as well!

Supplies:

Base form (I used a piece of driftwood!)
Twine
Yarn
Ribbons
Fabric

1. Gather your supplies all in one space so you are ready to go!
a. If you are using fabric, I would cut your strips at this time as well

2. Use blue pieces to represent the blue star part of the flag (I saw some online that used white beads throughout to represent the stars!) and alternate your red and white for the stripes.

3. Tie your strips on using the Larkshead Knot technique below. This is a great way to add your elements because you get two components out of one.
a. You can also tie them however you wish. Try tying little pieces together of different types/textures to give your flag more variety.

4. Create a piece for hanging. I did this by wrapping 3 pieces of twine around the one end, braiding it, and tying it off on the other side.

5. That's it! Feel free to add whatever types of elements you have lying around! Perfect decoration for the most rustic folks you know!

Fabric Flower

1/3/2019

Do you have a bunch of scrap fabric that you don't know what to do with? This is the perfect craft to use 'em up!

Supplies Needed:

Needle
Thread
Fabric
Scissors

1. Cut 8 3"x3" pieces out of your fabric (or various fabrics)

2. Fold each piece in half and then in half again...

3. While holding the fold of each piece, cut the corner into a rough looking heart shape (I went ahead and did all 8 pieces so they were ready for me and I felt like that really sped the process along!)

4. Thread your needle with thread (you don't use very much). Pick up your first piece of fabric. Holding it at its corner, sew through the corners a few times. DO NOT knot the thread after.

5. Grab your next piece of fabric, and thread your needle through that piece and your original piece a couple of times. Again, DO NOT knot the thread afterwards.

6. Keep repeating this process until all 8 pieces are sewed together.

7. NOW, you may tie your thread off to keep all of the pieces together.

8. As you let go of the corners, you'll see how all of the pieces are now together, but... it needs a little help becoming a flower. Begin "fluffing" up your pieces and spreading them outward. Oooo look at that flower grow! And just like that, your flower is formed and ready for whatever you wish to use it for!

(Side note: the fabric I used are actually pieces of my Papaw's flannel shirts - he passed a couple of years ago. I plan to use my flowers for wedding decorations/bouquets whenever that happens... cough, cough! ...That way he'll be with us on our special day.)