Day late and a penny short, eh? Woops! I like to try to have a new craft post every 2 weeks on Monday but completely forgot about scheduling one! So I thought I'd share this craft while it's still fresh in my mind!
The first time I did this craft was as a class at The Little Birdie Wine Nest in Parma. We had a full class and it was kind of tricky with all the hot glue guns that needed to be plugged in! This time, I presented the craft as a free Take & Make at the library where I work and I think people liked it! I used a fall ribbon on my mine because well... I love fall! But, you could add any ribbon you want and it would be super cool if you could make it interchangeable for different holidays and seasons as well!
Below are the steps that I took to make mine but I'm sure there are other ways to create this cute wreath!
1. So I made my own cardboard base that was about 11 inches in diameter and 1 inch in width but, you could go to the craft store and actually purchase a premade wooden form instead. If you use the cardboard (eh em, free) method, then just be careful as it can get a little tricky to cut out!
3. Start with your first cluster and take the center cork and put a line of hot glue on one side to stick the next cork to. When you start to add more it’ll get tricky! Add a line of glue on both the inside cork and the cork you just glued so the next one has something to stick to! *Note: You may have to add extra glue in certain places to secure the corks better!
4. Glue all your flower clusters together and then glue them to your form. You should put A LOT of glue down for each one and you will need to add some in between each one on the previous cluster so it has something to stick to. Add all your clusters until you have a space left like in the photo (this is for your bow).
5. Make your bow however you like in the photo by crisscrossing the pieces and gluing them together. You pinch all the pieces together and secure them in the center with a 5in piece of your ribbon glued together at the back. That’s it! Thanks for crafting with me!
I GOT MARRIEDDDDDD!!!!! I'm a little excited, can you tell?!
Wedding planning in general can be stressful but add COVID to the mix and it's just down right exhausting! We went back and forth for so long about what the heck we were even doing and basically started outlining two different wedding possibilities for our day. We ended up still having it at our venue and just had to limit our list down.
Despite all the stress over every little detail, dresses, decor, the weather, and covid, it turned out to be the most perfect and beautiful day! I still can't believe just how perfect everything was and felt. To have those closest to us there to celebrate with us and enjoy a happy evening during all the craziness in the world was so incredibly heartwarming!
With any big life event, we received plenty of cards! Not just any cards, wedding cards of course. They were just so beautiful, sparkly, meaningful, etc. and I just could not throw them away. I saw the idea people have been making where they punch shapes out of them and put them in a frame but I thought, what if I get tired of having it on my wall, or want to move it around? Then I'm stuck with a big frame to put somewhere else! And I mean that in the best way possible obviously!
So instead, I thought, how could I make these into a book or album of some sort and tried looking up ideas on that. Some people take this very seriously and sew sections together just like you would a real handcrafted book but that was a little too much for me! When I began my "dictionary art" I had one singular dictionary and my goal was to use up every bit of that dictionary. After using all the pages and feeling so accomplished I then decided to hoard the cover and backing of the dictionary like a crazy person. Well, well well! Did those come in handy or what?! This became my front and back of our new wedding card book! I did not take step-by-step photos but I'll attempt to explain my process!
*Optional: I first decorated both the cover and the backs to spruce up the book. I used scrapbook paper, copies of our wedding invite, and stickers.
1. I found my smallest card and lined them up centered with the cover of the book so that I could mark off roughly where 2 holes would go into the cover, card, and back of the book.
2. I used an electric drill to drill through both the cover and back.
3. Next, I marked every card with matching holes to the cover and hole punched all of them.
4. Optional. I also cut every card in half with an E-xacto knife so that they would flip more easily.
5. I used 2 large binder rings (3in to fit the amount of cards we had), and fed the rings through each card!
Note: This was the amount of cards from about 60 people, so if you have a larger event you might want to/need to make multiple books!
And that was it! Now we have a gorgeous keepsake!
This is a quick project that you can give as a gift with pictures already in it or left empty for the person to fill. They're super cute and itty bitty! Something fun and different to brighten up any day.
1. The first step for this itty bitty project is gathering all your supplies because there's a lot of potential components. I like to gather everything up that way I have all the supplies necessary near me and ready to go. This is where I picked my color scheme for my scrapbook (I used scraps from my scrap bag) and came up with yellow, grey, and navy. Pretty! I also gathered a pile of random stickers and other embellishments (I had no idea what I would use!).
2. I then traced the coasters onto the backs of the scrapbook paper I would use for the main sheets so I could cut them out to size.
3. I decided the order of the pages that I wanted and laid them out on the coasters. Next, I glued the sheets onto the coasters using the Mod Podge and a paint brush. I did half at a time instead of trying to glue the whole sheet at once, that way I could be more aware of bubbles showing up.
6. Start to plan out your pages by laying out the pieces and parts that you want to include before you officially glue anything down!
7. Mod Podge dries pretty quick so this part of the project will go fast. You can use a hot glue gun for heavier/awkward objects to secure them to the boards.
8. Looks super cute, right?! Well, this is where I realized... oh crap... how do I hold it together?! I looked up some ideas and liked the nonrestrictive binder ring option. But, this meant there needed to be holes for the ring to pass through. I decided to use a drill as this was the only option we had to my knowledge that could accomplish this. I think if I had some sort of press that would have been the way to go! I drilled through and it slightly tore up my paper! Ugg not cool!
I am going to be doing this for an upcoming work program so decided to create holes in all 125 coasters... yay!... that way they are done ahead of time instead of afterwards. Still, I do not think this is the best option... it seems to tear through the chipboard (these are really flimsy chipboard!) and I encourage you to find a better way if possible :) It still turned out cute overall!
Let me start by saying anything... and I mean anything can be used for an altered book journal! This is what makes this project so much fun and so versatile. Every book is different, every page is different, and every material is different. The purpose of an "altered book" is making an old book into a new piece of art. There are many types of altered books, but for this project, we are beginning an altered book "journal". A journal can be used as a "smash book" for travel or random memories or can be used for a literal journal to write in. There are many possibilities.
I did this journal page spread for one of my classes. This was a little tricky as I had to come up with something that we could all do together in our own books but something that could get everyone started and get those creative gears moving! The page above is what I came up with. It is something very simple and uses minimal supplies. We could've gone crazy and used paints, textures, inks, stamps, stickers, etc. but I kept it simple for an easy clean up and to also show that you don't need anything fancy for this type of project!
1. First off, let's talk about picking our book. If you can find something with "sewn" pages, that's the way to go! The modern glued pages are terrible for an altered book project! They are too flimsy and as you cut away more pages it loses its stability and could fall apart! These photos show what a sewn spine looks like verses a glued spine.
3. Once you are done cutting out pages throughout the book, you are ready to start gluing. As mentioned above, glue the pages to the left and right of the cut together, hiding that cut line. I use Mod Podge for this, putting it on in an even, thin layer. You can always come back and add more if the corners aren't glued down after it dries.
6. All I did to finish this page spread up was glue! First, I arranged everything on the pages to figure out where I wanted it all to go. Once I was good with it all I glued everything down with a thin layer of Elmer's Glue, you could use Mod Podge instead. I also used the hot glue gun to glue the ribbon and the flowers down. But that was it!
This was a pretty simple page. But you could really get crazy and do pages like the examples below! Happy Journaling!
Rebecca Myers (Dickinson)
Hey there, I'm Becca, or Rebecca, but not Becky, never Becky, unless you're my family from down south! I'm a simply modern librarian by day and an artist by night. My pursuit is for a simple, happy, healthy, and more fulfilling life! I hope I inspire you to get crafty!