I've done this fairy lantern craft before with glass jars and people loved it! They couldn't wait to take it home, show it off, and replicate it with kids/grandkids/friends. I left that night feeling really great about the program and that I helped people create something they fell in love with.
Time for some self-shaming. David, my boyfriend, and I eat a tonnnnn of peanut butter. Like, a tonnnnn, probably way more than we should to be honest. We've actually recently cut down on it but, boy oh boy, do we love us some PB.
On that note, I was getting anxiety over using up so many plastic containers. There had to be something I could use them for! With no plan in mind, I started soaking them, washing them, and de-labeling them meticulously one at a time with no purpose at the end of the tunnel.
Then, the fairy lanterns came into mind. I had done it before with glass and thought, well, why not give it a try... I have plenty more to use if it doesn't work! I gotta say it turned out pretty darn cute. I think it's decently disguised but if I were doing it for myself, or for a gift, I think I would choose to add a lot more moss and other items to disguise it even more. Anywho, the instructions are as follows, happy crafting!
Note: I did not cover the entire lip of the jar so that it can still be twisted shut if desired.
4. Next, I did the same thing with the lid of the jar. I knew I wanted to paint it and glue items to it so I thought covering it with tissue paper would create a nice textured layer for this purpose.
Note: I did not cover the inside of the lid and afterwards, I wish I had. I can, of course, do this at any time but I wanted to point this out. I feel if you do not cover the inside, you can see the red of the lid on the outside. It isn't super noticeable, but I notice it.
7. Here is where I painted my lid to camouflage it. I knew I would be adding moss later, but I didn't want any of the white tissue paper coming through! I sponged on a layer of green, then brown, then black with the foam brush, just enough to cover most of the white.
Note: I wanted to point out that I noticed the expiration date and other numbers was printed on the plastic and was totally showing through the tissue paper! Eww! I covered this up with yet another leaf and some more moss.
Turn that beauty on and look at her glow!
Were using the PB Jar method at work for a mother-daughter craft program. This makes it even better that we are using plastic jars instead of glass in case we have any little ones attend! We are also including in the description that these are actually Peanut Butter jars and that if you have a peanut allergy we do not recommend attending just in case any residue is leftover.
Let me know if you have any questions!
This is a pretty quick fall craft to spruce up your shelf space for the autumn weather or maybe a gift idea! The one I originally saw on Pinterest was very cute with bright fall colors. There are so many options with this type of craft, it's almost overwhelming. I thought about going with a subtle brown, tan, and white color combination at first. I thought it would be very elegant for Thanksgiving but somehow I ended up switching to more of a Halloween based theme with a distressed frame and distressed pages. The possibilities are endless but I hope you find one that you love!
1. Gather up all of your supplies so that you have them near and dear to your project space.
2. If you're like me, I had a few frames to choose from and was very stressed with all the options! Finally, I decided on something medium-sized and relatively simple in structure. I forgot to take a picture ahead of time, but I "distressed" my frame a bit by very lightly adding black in light strokes to make it seem old/give it some more depth to the frame.
3. The original post I saw for this project involved using cute polka dot scrapbook paper as a background. I was going to do this as well, but saw I had some old book pages lying around and thought that would be a much cooler effect! If you're using a piece of scrapbook paper make sure you glue/tape it on carefully, making sure there are no air bubbles forming on your background! For me, I added torn strips of book pages by gluing each piece one by one to the background. Keep adding and adding until your background is full.
4. While your background is setting/drying, this is a good time to decide what you're going to do with your acorns. I decided to paint mine a metallic gold. I used 3 "craft" acorns and 3 real acorns that I found in the woods just to try out the different types to see if there were any differences... there aren't (but if you use real ones make sure you "bake" them to get rid of all the little buggies in there!) You'll want to do a couple of coats.
There are many ways to do this. You could leave the acorns in their natural state, paint them, decorate them, wrap them with thread/yarn/twine, oooo!
6. While my acorns were drying I also made the glued book pages look more distressed/eerie for a more Halloween look. I lightly brushed very little black and brown paint over the pages giving them that look which you can see in the following photo.
7. Lay out your acorns and see how you like them before you glue them. I used hot glue. Make sure you put enough on there and hold the acorn while it sets.
8. Lastly, I decided to add a little extra somethin' somethin' to the frame and hot glued a flower to the upper corner.
That's it, we're all done!
I had always wanted to do this but all the methods I looked at seemed unrealistic and lengthy. Thanks to CreativeBug (which is offered through the Cuyahoga County Library system for free) I was able to discover a quick, super easy way to complete this craft!
I only have the end result photos and not the progress photos but, seriously, I don't think you'll need them because it's sooooo easy!
1. Print your photo out on regular ol' copy paper on a LAZER printer. It can be in black and white or color. Cut away any excess paper.
2. Paint on a nice solid layer of Mod Podge on your wood piece (You don't want too much that it's goopy and sliding off the sides but enough to see a white layer).
3. Flip your printed photo into the Mod Podge, ink side down and smooth out to remove any air bubbles.
4. Take your burnisher/flat edge and rub the paper with some effort. This helps get rid of any extra air pockets and gets the ink nice and set into the Mod Podge.
5. Wait for the Mod Podge to COMPLETELY dry.
6. Fill a cup with warm water or just let the faucet lightly run (feels pretty wasteful though!). Wet either your fingers, or a sponge, and begin to lightly saturate the photo. DO NOT soak the photo!
7. Start lightly rubbing the paper in circular motions. The paper will begin to turn into a pulp and will slowly roll off the wood surface.
8. As the wood dries you may see some paper areas you missed. Just go back over these in the same fashion by wetting your fingers and rubbing the area in a circular motion.
9. After you're done, you can coat the wood with a finishing agent, paint the sides, decorate with embellishments, etc.
Really cute gift idea, especially for family photos!
Note: "They" do make photo transfer solutions specifically for this type of project. Even Mod Podge makes a specific Mod Podge for it as well. You can also use a gel medium technique but that takes days to set! I don't see the point in buying extra (expensive) supplies when beautiful, simple Mod Podge works just as good!
Here are my 3 transfers below:
Hey there, I'm Becca, or Rebecca, but not Becky, never Becky, unless you're my family from down south! I'm a simply modern librarian by day and an artist by night. My pursuit is for a simple, happy, healthy, and more fulfilling life! I hope I inspire you to get crafty!